Beneficios de Gestión Visual sobre Justo a Tiempo en la industria maquiladora
DOI:
https://doi.org/10.20983/culcyt.2023.2.2a.3Keywords:
Andon; Gestión Visual; Justo a Tiempo; industria maquiladora; modelado de ecuaciones estructuralesAbstract
Lean manufacturing is a set of tools focused on the continuous improvement of production processes by reducing waste to provide good customer service through quality. This paper presents a structural equation model that relates three lean manufacturing tools (Andon, Visual Management and Just-in-time). This model proposes three hypotheses validated using information from 240 maquiladora companies in northern Mexico obtained through a questionnaire. This article aims to quantify the effect of Visual Management and Andon tools on Just in Time within maquiladora companies. To validate the model's hypotheses, WarpPls 7.0® software is used using the partial least squares (PLS) technique. The results indicate a direct relationship from Visual Management on Andon with a size of β=0.525, Visual Management positively affects Just in Time with a size of β=0.256, and finally, Andon also affects Just in Time philosophy with β=0.373. The sensitivity analysis shows that it is important for managers to ensure that they execute the implementation activities of Visual Management and Andon to guarantee the correct functioning of Just in Time.
Downloads
References
J. C. Castillo y G. de Vries, “The domestic content of Mexico’s maquiladora exports: A long-run perspective”, J. Int. Trade Econ. Dev., vol. 27, no. 2, pp. 200-219, 2018, doi: 10.1080/09638199.2017.1353125.
B. Durakovic, R. Demir, K. Abat y C. Emek, “Lean manufacturing: Trends and implementation issues”, Period. Eng. Nat. Sci., vol. 6, no. 1, pp. 130-143, 2018, doi: 10.21533/pen.v6i1.45.
A. P. Rojas y V. Gisbert, “Lean manufacturing: herramienta para mejorar la productividad en las empresas”, 3C Empresa, ed. esp., pp. 116-124, 2017, doi: 10.17993/3cemp.2017.especial.116-124/.
Y. Eaidgah, A. A. Maki, K. Kurczewski y A. Abdekhodaee, “Visual management, performance management and continuous improvement”, Int. J. Lean Six Sigma, vol. 7, no. 2, pp. 187-210, 2016, doi: 10.1108/IJLSS-09-2014-0028.
J. K. Liker, The Toyota Way: 14 Management Principles from the World’s Greatest Manufacturer. McGraw-Hill, 2004.
C. D. Singh, R. Singh, J. S. Mand y S. Singh, “Application of Lean and JIT principles in supply chain management”, Int. J. Manag. Res. Bus. Strategy, vol. 2, no. 1, pp. 85-98, 2013.
L. P. Steenkamp, D. Hagedorn-Hansen y G. A. Oosthuizen, “Visual Management System to Manage Manufacturing Resources”, Procedia Manuf., vol. 8, pp. 455-462, 2017, doi: 10.1016/j.promfg.2017.02.058.
G. C. Parry y C. E. Turner, “Application of lean visual process management tools”, Prod. Plan. Control, vol. 17, no. 1, pp. 77-86, 2006, doi: 10.1080/09537280500414991.
S. Shinde, S. Jahagirdar, S. Sane y V. Karandikar, “Set-up time Reduction of a Manufacturing Line using SMED Technique”, Int. J. Adv. Ind. Eng., vol. 2, no. 2, pp. 50-53, 2014.
B. Kattman, T. P. Corbin, L. E. Moore y L. Walsh, “Visual workplace practices positively impact business processes”, Benchmarking, vol. 19, no. 3, pp. 412-430, 2012, doi: 10.1108/14635771211243021.
P. Wojakowski, “Plant performance calculation in automotive industry using Andon system”, Research in Logistics & Production, vol. 5, 2015.
L. Naciri, Z. Mouhib, M. Gallab, M. Nali, R. Abbou y A. Kebe, “Lean and industry 4.0: A leading harmony”, Procedia Comput. Sci., vol. 200, pp. 394-406, 2022, doi: 10.1016/j.procs.2022.01.238.
J. L. García-Alcaraz, A. S. Morales, J. R. Díaz-Reza, E. Jiménez, C. Javierre y J. Blanco, “Effect of lean manufacturing tools on sustainability: the case of Mexican maquiladoras”, Environ Sci Pollut Res, vol. 29, no. 26, pp. 39622-39637, 2022, doi: 10.1007/s11356-022-18978-6.
B. Tezel, L. J. Koskela y P. Tzortzopoulos, “The functions of visual management”, presentado en International Research Symposium, Manchester, R. U., 2009.
A. Tezel, L. Koskela y P. Tzortzopoulos, “Visual management in production management: a literature synthesis”, J. Manuf. Technol. Manag., vol. 27, no. 6, pp. 766-799, 2016, doi: 10.1108/JMTM-08-2015-0071.
N. Shimbun, ed., Visual control systems. Portland, OR: Productivity Press, 1995.
M. Bevilacqua, F. E. Ciarapica, G. Mazzuto y C. Paciarotti, “Visual Management implementation and evaluation through mental workload analysis”, IFAC Proc. Vol., vol. 46, no. 7, pp. 294-299, 2013, doi: 10.3182/20130522-3-BR-4036.00065.
S. E. Munive, V. D. Paucar, J. C. Alvarez y S. Nallusamy, “Implementation of a Lean Manufacturing and SLP-based system for a footwear company”, Production, vol. 32, p. e20210072, 2022, doi: 10.1590/0103-6513.20210072.
M. Martinelli, M. Lippi y R. Gamberini, “Poka Yoke Meets Deep Learning: A Proof of Concept for an Assembly Line Application”, Appl. Sci., vol. 12, no. 21, 2022, p. 11071, doi: 10.3390/app122111071.
G. D. Galsworth, Visual systems: Harnessing the power of the visual workplace. Nueva York: American Management Association, 1997.
H. C. Martínez y J. Calvo-Amodio, “Towards lean for sustainability: Understanding the interrelationships between lean and sustainability from a systems thinking perspective”, J. Clean. Prod., vol. 142, pp. 4384-4402, 2017, doi: 10.1016/j.jclepro.2016.11.132.
S. Z. Ismail, “Design and Development of Andon System for Machining Machine at FKP Lab”, tesis de licenciatura, Universiti Malaysia Pahang, 2013.
N. Kumar, S. Shahzeb Hasan, K. Srivastava, R. Akhtar, R. Kumar Yadav y V. K. Choubey, “Lean manufacturing techniques and its implementation: A review”, Materials Today: Proceedings, vol. 64, pp. 1188-1192, 2022, doi: 10.1016/j.matpr.2022.03.481.
S. Singh y U. Soni, “Predicting Order Lead Time for Just in Time production system using various Machine Learning Algorithms: A Case Study”, 2019 9th Int. Conf. on Cloud Computing, Data Science & Engineering (Confluence), Noida, India, 2019, pp. 422-425, doi: 10.1109/CONFLUENCE.2019.8776892.
S. Phogat y A. K. Gupta, “Evaluating the elements of just in time (JIT) for implementation in maintenance by exploratory and confirmatory factor analysis”, Int. J. Qual. Reliab. Manag., vol. 36, no. 1, pp. 7-24, 2019, doi: 10.1108/IJQRM-12-2017-0279.
K. Murata, “On the Role of Visual Management in the Era of Digital Innovation”, Procedia Manuf., vol. 39, pp. 117-122, 2019, doi: 10.1016/j.promfg.2020.01.246.
J. Hirvonen, “Design and implementation of Andon system for Lean manufacturing”, tesis de maestría, Aalto University, 2018.
N. D. Minh, N. D. Nguyen y P. K. Cuong, “Applying lean tools and principles to reduce cost of waste management: An empirical research in Vietnam”, Manag. Prod. Eng. Rev. , vol. 10, no. 1, pp. 37-49, 2019, doi: 10.24425/mper.2019.128242.
N. Kock, WarpPLS user manual: version 6.0. Laredo, TX, EUA, 2021.
J. F. Hair, J. J. Risher, M. Sarstedt y C. M. Ringle, “When to use and how to report the results of PLS-SEM”, Eur. Bus. Rev., vol. 31, no. 1, pp. 2-24, 2019, doi: 10.1108/EBR-11-2018-0203.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 José Roberto Díaz Reza, Jorge Luis García Alcaraz, Luis Javier Márquez Figueroa
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Todos los contenidos de CULCYT se distribuyen bajo una licencia de uso y distribución “Creative Commons Reconocimiento-No Comercial 4.0 Internacional” (CC-BY-NC). Puede consultar desde aquí la versión informativa de la licencia.
Los autores/as que soliciten publicar en esta revista, aceptan los términos siguientes: a) los/las autores/as conservarán sus derechos de autor y garantizarán a la revista el derecho de primera publicación de su obra; y b) se permite y recomienda a los/las autores/as agregar enlaces de sus artículos en CULCYT en la página web de su institución o en la personal, debido a que ello puede generar intercambios interesantes y aumentar las citas de su obra publicada.
