Uso de PRFC para mejorar las propiedades mecánicas del concreto: una revisión
DOI:
https://doi.org/10.20983/culcyt.2021.2.3.1Palabras clave:
PRFC, concreto, propiedades mecánicas, impacto ambientalResumen
El polímero reforzado con fibra de carbono (PRFC) hoy en día se ha vuelto una alternativa de material de fortalecimiento para las estructuras en la construcción porque mejora las propiedades mecánicas del concreto y aunque es un proceso de fabricación de costo elevado, origina un gran beneficio para la estructura de concreto armado (CA). El objetivo de este trabajo ha sido revisar la investigación notable publicada en revistas indexadas de los años 2012 a 2021 (41 artículos de Scopus, 7 de EBSCO, 2 de Science Direct y 1 de Redalyc), sobre el uso del polímero reforzado con fibra de carbono en elementos estructurales, como reforzamiento interno o externo, que beneficia a la estructura en su periodo de vida, al impacto ambiental que este produce, al costo del material y al manejo del material in situ.
Descargas
Citas
N. Al-Akhras y M. Al-Mashraqi, “Repair of corroded self-compacted reinforced concrete columns loaded eccentrically using carbon fiber reinforced polymer”, Case Stud. Constr. Mater., vol. 14, no. 476, pp. 1-19, 2021, doi: 10.1016/j.cscm.2020.e00476.
J. Yan, Y. Liu, Z. Xu, Z. Li y F. Huang, “Experimental and numerical analysis of CFRP strengthened RC columns subjected to close-in blast loading”, Int J Impact Eng, vol. 146, no. 103720, pp. 1-21, 2020, doi: 10.1016/j.ijimpeng.2020.103720.
L. Jin, H. Chen, Z. Wang y X. Du, “Size effect on axial compressive failure of CFRP-wrapped square concrete: Tests and simulations”, Compos. Struct., vol. 254, no. 112843, pp. 1-19, 2020, doi: 10.1016/j.compstruct.2020.112843.
N. Stoiber, M. Hammerl y B. Kromoser, “Cradle-to-gate life cycle assessment of CFRP reinforcement for concrete structures: Calculation basis and exemplary application”, J. Clean. Prod., vol. 280, no. 124300, pp. 1-12, 2021, doi: 10.1016/j.jclepro.2020.124300.
G.-J. Liu, E.-L. Bai, J.-Y. Xu, N. Yang y T.-j. Wang, “Dynamic compressive mechanical properties of carbon fiber-reinforced polymer concrete with different polymer-cement ratios at high strain rates”, Constr Build Mater., vol. 261, no. 119995, pp. 1-11, 2020, doi: 10.1016/j.conbuildmat.2020.119995.
L. Knapčíková y A. Behúnová, “Research of Casting Moulding of Epoxy Resin Composites Reinforced with High-Strength Fibres during the Manufacturing Operations”, TEM Journal, vol. 9, no. 4, pp. 1488-1494, 2020, doi: 10.18421/TEM94‐22.
D. Brizuela-Valenzuela, M. N. González-García y A. Cobo-Escamilla, “Influence of the Modulus of Elasticity of CFRPs on the Compressive Behavior of Confined Test Pieces and on the Flexural Behavior of Short Concrete Beams”, Appl. Sci., vol. 11, no. 491, pp. 1-17, 2021, doi: 10.3390/app11020491.
R. Gopal, S. Krishnachandran y B. H. Bharatkumar, “Monotonic and cyclic response of hybrid fibre reinforced polymer reinforcing system for reinforced concrete columns under eccentric loading”, Adv. Struct. Eng., vol. 23, no. 16, pp. 3456-3469, 2020, doi: 10.1177/1369433220939209.
I. K. Dhindsa, H. S. Rai y H. Singh, “Development of rectangular hybrid-stiffened-plate structural system with fibre-reinforced polymer fabric composite in tension zone”, Adv. Struct. Eng., vol. 24, no. 2, pp. 211-226, 2021, doi: 10.1177/1369433220948755.
G. Wang, C. Yang, C. Meng, Z. Xia, Y. Pan y M. Wang, “Experimental study on the mechanical and self-sensing behaviors of prestressed carbon fiber–reinforced polymer reinforced concrete composite structures”, Adv. Struct. Eng., vol. 23, no. 8, pp. 1507-1520, 2020, doi: 10.1177/1369433219895915.
W. Zhu, M. Li, H. Qin, F. Fu y F. Liu, “Behavior of RC Beams Strengthened Using Steel-Wire-Carbon-Fiber-Reinforced Plates”, Materials, vol. 13, no. 3996, pp. 1-16, 2020, doi: 10.3390/ma13183996.
M. A. L. Silva, K. V. Dedigamuwa y J. C. P. H. Gamage, “Performance of severely damaged reinforced concrete flat slab-column connections strengthened with Carbon Fiber Reinforced Polymer”, Compos. Struct., vol. 255, no. 112963, pp. 1-10, 2021, doi: 10.1016/j.compstruct.2020.112963.
Y. Zhang, C. Yan, X. Huang y Y. Chen, “Structural Design and Mechanical Performance Analysis of Carbon Fiber Closed Fixtures for UHV Transmission Lines”, Math. Probl. Eng., vol. 2021, id. 6105360, pp. 1-13, 2021, doi: 10.1155/2021/6105360.
R. Auriga et al., “Performance properties of plywood composites reinforced with carbon fibers”, Compos. Struct., vol. 248, no. 112533, pp. 1-7, 2020, doi: 10.1016/j.compstruct.2020.112533.
M. Moncayo-Theurer, J. Rodriguez, Alcívar, López, Soriano y Villacis, “Las fibras de carbono como una alternativa para reforzamiento de estructuras”, Ingeniería, vol. 20, no. 1, pp. 57-62, 2016. [En línea]. Disponible: https://www.redalyc.org/pdf/467/46750927006.pdf
K. Ostrowski, R. Kinasz y P. Dybeł, “The impact of surface preparation for self-compacting, high-performance, fiber-reinforced concrete confined with CFRP using a cement matrix”, Materials, vol. 13, no. 2830, pp. 1-18, 2020, doi: 10.3390/ma13122830.
E. Pakdel, S. Kashi, R. Varley y X. Wang, “Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes”, Resour Conserv Recycl, vol. 166, no. 105340, pp. 1-20, 2021, doi: 10.1016/j.resconrec.2020.105340.
M. Molina, J. J. Cruz, S. Oller, A. H. Barbat y L. Gil, “Estudio numérico-experimental de la interfaz hormigón-epoxi-FRP para una estructura reforzada sometida a doble corte”, Rev. int. métodos numér. cálc. diseño ing., vol. 28, no. 2, pp. 65-79, 2012. [En línea]. Disponible: https://www.scipedia.com/public/Molina_et_al_2012a
G. Mihu, C. V. Ungureanu, V. Bria, M. Bunea y R. Chihai, “The Mechanical Properties of Organic Modified Epoxy Resin”, The Annals Of “Dunarea de Jos”, University of Galati Fascicle IX. Metallurgy and Materials Science, vol. 38, no. 3, pp. 10-14, 2020, doi: 10.35219/mms.2020.3.02.
S. Dong, C. Li y G. Xian, “Environmental impacts of glass-and carbon-fiber-reinforced polymer bar-reinforced seawater and sea sand concrete beams used in marine environments: An LCA case study”, Polymers, vol. 13, no. 154, pp. 1-16, 2021, doi: 10.3390/polym13010154.
F. Zhang, L. Zhang, M. Yaseen y K. Huang, “A review on the self-healing ability of epoxy polymers”, J. Appl. Polym. Sci., vol. 138, no. 50260, pp. 1-14, 2020, doi: 10.1002/app.50260.
D. Quan, R. Alderliesten, C. Dransfeld, N. Murphy, A. Ivanković y R. Benedictus, “Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils”, Compos. Struct., vol. 252, no. 112699, pp. 1-9, 2020, doi: 10.1016/j.compstruct.2020.112699.
K. Helal, S. Yehia, R. Hawileh y J. Abdalla, “Performance of preloaded CFRP-strengthened fiber reinforced concrete beams”, Compos. Struct., vol. 244, no. 112262, pp. 1-12, 2020, doi: 10.1016/j.compstruct.2020.112262.
F. Suppanz y B. Kromoser, “Verbundverhalten subtraktiv bearbeiteter CFK‐Stäbe in UHPC”, Beton- und Stahlbetonbau, vol. 115, no. 8, pp. 1-10, 2020, doi: 10.1002/best.201900088.
X. Wang y L. Cheng, “Bond characteristics and modeling of near-surface mounted CFRP in concrete”, Compos. Struct., vol. 255, no. 113011, pp. 1-13, 2021, doi: 10.1016/j.compstruct.2020.113011.
R. Z. Al-Rousan, M. A. Alhassan y R. J. Al-omary, “Response of interior beam-column connections integrated with various schemes of CFRP composites”, Case Stud. Constr. Mater., vol. 14, no. 488, pp. 1-18, 2021, doi: 10.1016/j.cscm.2021.e00488.
Z. Chen, P. Huang, G. Yao, X. Guo, Y. Yang, W. Li y B. Wu, “ Experimental study on fatigue performance of RC beams strengthened with CFRP under variable amplitude overload and hot-wet environment”, Compos. Struct., vol. 244, no. 112308, pp. 1-11, 2020, doi: 10.1016/j.compstruct.2020.112308.
B. Liu, J. Zhou, X. Wen , X. Hu y Z. Deng, “Mechanical properties and constitutive model of carbon fiber reinforced coral concrete under uniaxial compression”, Constr Build Mater., vol. 263, no. 120649, pp. 1-13, 2020, doi: 10.1016/j.conbuildmat.2020.120649.
Q. Cao, X. Lv, C. Zhou y S. Song, “High strength expansive concrete-encased-steel filled carbon fiber reinforced polymer tubes under axial monotonic and cyclic load”, J Compos Mater, vol. 54, no. 29, pp. 4557-4573, 2020, doi: 10.1177/0021998320936743.
X. Cheng, X. Cai, B. Liu y W. Zhang, “Vehicle-bridge coupling dynamic response of a box bridge after reinforcement with prestressed CFRP”, J. Vibroengineering, vol. 22, no. 7, pp. 1715-1730, 2020, doi: 10.21595/jve.2020.21274.
V. Adam, J. Bielak, C. Dommes, N. Will y J. Hegger, “Flexural and Shear Tests on Reinforced Concrete Bridge Deck Slab Segments with a Textile-Reinforced Concrete Strengthening Layer”, Materials, vol. 13, no. 18, pp. 1-25, 2020, doi: 10.3390/ma13184210.
V. H. Mac, J. Huh, N. S. Doan, G. Shin y B. Y. Lee, “Thermography-Based Deterioration Detection in Concrete Bridge Girders Strengthened with Carbon Fiber-Reinforced Polymer”, Sensors, vol. 20, no. 3263, pp. 1-19, 2020, doi: 10.3390/s20113263.
S. Sun, K. Mei, Y. Sun, B. Li y H. Huang, “Structural Performance of Super-Long-Span Cable-Stayed Bridges with Steel and CFRP Hybrid Cables”, Arab J Sci Eng, vol. 45, p. 3569-3579, 2019, doi: 10.1007/s13369-019-04166-1.
H. Dong, Y. Zhou y N. Zhuang, “Study on Corrosion Characteristics of Concrete-Filled CFRP-Steel Tube Piles under Hygrothermal Environment”, Adv. Mater. Sci. Eng., no. 4849038, pp. 1-11, 2020, doi: 10.1155/2020/4849038.
J. Zhou, X. Zhang, L. Zhang, F. Dong y E. Oh, “Static load tests of driven concrete piles under CFRP confinement”, Geomech. Geoengin., pp. 1-14, 2019, doi: 10.1080/17486025.2019.1635713.
A. Totonchi, A. Ansaripour y S. Shivaei, “Effect of Different Arrangements of CFRP Wraps on the Axial Stress–Strain Behaviour of Confined Concrete Cylinders: Experimental Study and Numerical Modelling”, Iran J Sci Technol Trans Civ Eng, vol. 44, pp. 1087-1100, 2020, doi: 10.1007/s40996-019-00293-9.
X. Lao, X. Han, J. Ji y B. Chen, “The compression behavior of CFRP-repaired damaged square RC columns”, Constr Build Mater., vol. 223, pp. 1154-1166, 2019, doi: 10.1016/j.conbuildmat.2019.07.182.
R. Z. Al-Rousan, “Impact of elevated temperature and anchored grooves on the shear behavior of reinforced concrete beams strengthened with CFRP composites”, Case Stud. Constr. Mater., vol. 14, no. 487, pp. 1-21, 2021, doi: 10.1016/j.cscm.2021.e00487.
F. Al-Mahmoud, A. Castel, T. Q. Minh y R. François, “Reinforced Concrete Beams Strengthened with NSM CFRP Rods in Shear”, J. Sens., vol. 18, no. 10, pp. 1563-1574, 2015, doi: 10.1260/1369-4332.18.10.1563.
F. Yu, S. Guo, S. Wang y Y. Fang, “Experimental study on high pre-cracked RC beams shear-strengthened with CFRP strips”, Compos. Struct., vol. 225, no. 111163, pp. 1-14, 2019, doi: 10.1016/j.compstruct.2019.111163.
A. Jawdhari, A. Peiris y I. Harik, “Experimental study on RC beams strengthened with CFRP rod panels”, Eng. Struct., vol. 173, pp. 693-705, 2018, doi: 10.1016/j.engstruct.2018.06.105.
H. Saleh, R. Kalfat, K. Abdouka y R. Al-Mahaidi, “Punching shear strengthening of RC slabs using L-CFRP laminates”, Eng. Struct., vol. 194, pp. 279-289, 2019, doi: 10.1016/j.engstruct.2019.05.050.
P. Preinstorfer, P. Huber, T. Huber, B. Kromoser y J. Kolleger, “Experimental investigation and analytical modelling of shear strength of thin walled textile-reinforced UHPC beams”, Eng. Struct., vol. 231, no. 111735, pp. 1-11, 2021, doi: 10.1016/j.engstruct.2020.111735.
N. Moshiri, C. Czaderski, D. Mostofinejad y M. Motavalli, “Bond resistance of prestressed CFRP strips attached to concrete by using EBR and EBROG strengthening methods”, Constr Build Mater., vol. 266, no. 121209, pp. 1-14, 2021, doi: 10.1016/j.conbuildmat.2020.121209.
Y. M. Saeed, W. A. Aules, F. N. Rad y A. M. Raad, “Tensile behavior of FRP anchors made from CFRP ropes epoxy-bonded to uncracked concrete for flexural strengthening of RC columns”, Case Stud. Constr. Mater., vol. 13, no. 435, pp. 1-19, 2020, doi: 10.1016/j.cscm.2020.e00435.
M. Garg, C. S. Das y R. Gupta, “Use of silica particles to improve dispersion of -COOH CNTs/carbon fibers to produce HyFRCC”, Constr Build Mater., vol. 250, no. 118777, pp. 1-15, 2020, doi: 10.1016/j.conbuildmat.2020.118777.
R. Salih, F. Zhou, N. Abbas y A. K. Mastoi, “Experimental investigation of reinforced concrete beam with openings strengthened using FRP sheets under cyclic load”, Materials, vol. 13, no. 3127, pp. 1-25, 2020, doi: 10.3390/ma13143127.
H. Elci, “Seismic strengthening of improperly repaired reinforced concrete columns using CFRP confinement”, Structures, vol. 28, pp. 266-275, 2020, doi: 10.1016/j.istruc.2020.08.072.
A. D. Mai, M. N. Sheikh, K. Yamakado y M. N. S. Hadi, “Nonuniform CFRP Wrapping to Prevent Sudden Failure of FRP Confined Square RC Columns”, J. Compos. Constr., vol. 24, no. 6, pp. 1-12, 2020, doi: 10.1061/(ASCE)CC.1943-5614.0001077.
G. Habert, E. Denarié, A. Šajna y P. Rossi, “Lowering the global warming impact of bridge rehabilitations by using Ultra High Performance Fibre Reinforced Concretes”, Cem Concr Compos, vol. 38, pp. 1-11, 2013, doi: 10.1016/j.cemconcomp.2012.11.008.
A. O. Sojobi y K. M. Liew, “Flexural behaviour and efficiency of CFRP-laminate reinforced recycled concrete beams: Optimization using linear weighted sum method”, Compos. Struct., vol. 260, no. 113259, pp. 1-11, 2020, doi: 10.1016/j.compstruct.2020.113259.
Publicado
Cómo citar
Número
Sección
Licencia
Todos los contenidos de CULCYT se distribuyen bajo una licencia de uso y distribución “Creative Commons Reconocimiento-No Comercial 4.0 Internacional” (CC-BY-NC). Puede consultar desde aquí la versión informativa de la licencia.
Los autores/as que soliciten publicar en esta revista, aceptan los términos siguientes: a) los/las autores/as conservarán sus derechos de autor y garantizarán a la revista el derecho de primera publicación de su obra; y b) se permite y recomienda a los/las autores/as agregar enlaces de sus artículos en CULCYT en la página web de su institución o en la personal, debido a que ello puede generar intercambios interesantes y aumentar las citas de su obra publicada.
